دوشنبه، 4 مهر 1401 تماس با ما نقشه سایت صفحه اصلی English
 
 
 
 
     

محمدتقی همزبان
مرتبه علمی :دانشیار
تخصص : Rock Mechanics, Geotechnics
زمینه های تحقیقاتی : Rock Mechanics, Soil Mechanics, Geotechnical Engineering, Numerical Modeling, Wear of Rock and Soil Cutting Tools
مراکز تحقیقاتی :Rock Mechanics Laboratory

پست الکترونیکی: hamzaban@sut.ac.ir
شماره تلفن: 04133459232
شماره فکس: 04133444311
رزومه:
Mohammad-Taghi Hamzaban, Ph.D.
Associate Professor of Rock Mechanics

Mining Eng. Faculty, Sahand University of Technology, Tabriz, Iran.


Tel:   +98 413 345 9232
Fax:  +98 413 344 4311
Email: hamzaban@sut.ac.ir
           hamzaban79@gmail.com
 
Research Center:
Rock Mechanics Laboratory
 
Links:
     ORCID
     ResearchGate
     Google Scholar
     Publons

 

EDUCATION

2007 – 2013          Rock Mechanics Engineering, University of Tehran, Iran
                              Thesis ‘Development of Cerchar abrasion test for assessment of rock abrasivity’
 
2002 – 2005          MSc, Rock Mechanics Engineering, University of Tehran, Iran
                              Thesis ‘Evaluation of the three-dimensional displacement profiles around tunnels in soft ground with numerical modelling
 
1998 – 2001          BSc, Mining Engineering, Sahand University of Technology, Tabriz, Iran

 

CAREER SUMMARY

2021 – Date                Associate professor, Faculty of Mining Engineering, Sahand University of Technology, Tabriz, Iran
2013 – 2021                Assistant professor, Faculty of Mining Engineering, Sahand University of Technology, Tabriz, Iran
  • Member of University Innovation Council (2016-2017);
  • Faculty vice chairman (2014-2021);
  • Rock Mechanics Laboratory director (2013-date);
  • Lecturing at BSc and MSc levels (2013-date).
 
2007 – 2013                Senior Designer, Omid-e-Zist Paydar Consultant Engineers, Tehran, Iran
  • Stability analysis and support design of road and railway tunnels;
  • Slope stability analyses of railway trenches;
  • Slope stability analyses of landslides.
 
2008 – 2010                Expert of Geotechnique Laboratory, Permayon Advanced Strengthening Company, Tehran, Iran
2004 – 2007                Expert, Technical & Soil Mechanics Laboratory, Ministry of Roads & Urban Development, Tabriz, Iran
  • Geotechnical site investigations;
  • Expert of Soil Mechanics;
  • Foundation design.
     

TEACHING EXPERIENCE

MSc

Advanced Design of Underground Excavations; Advanced Design of Surface Excavations and Retaining Structures; Advanced Soil Mechanics; Foundation Engineering; Slope Stability Analysis; Design of Earth Retaining Walls.

 

BSc

Rock Mechanics;Rock Mechanics Laboratory;Soil Mechanics;Tunneling and Shaft Sinking.

 


RESEARCH INTERESTS

Rock Mechanics, Soil Mechanics, Geotechnical Laboratory Investigations, Numerical Modeling, Mechanized Tunneling, Wear of Rock and Soil Cutting Tools.

 


PUBLICATIONS

Peer-Reviewed Journal Papers

  • Hamzaban, M. T., Rish Sefid Mohammadi, N. (2022). Effects of water content and grain size on soil-cutting tools interactions: implications of LCPC abrasion test, International Journal of Mining and Geo-Engineering, DOI: https://10.22059/ijmge.2021.301696.594849.
  • Hamzaban, M. T., Büyüksağiş, I. S., Touranchehzadeh, A. Manafi, M. (2021). The Effect of Heat Shocks and Freezing–Thawing Cycles on the Mechanical Properties of Natural Building Stones, Journal of Modern Mechanical Engineering and Technology, Vol. 8, DOI: https://doi.org/10.31875/2409-9848.2021.08.09.
  • Hamzaban, M. T., Büyüksağiş, I. S., Manafi, M., Touranchehzadeh, A. (2021). The effect of saturation on the physical and mechanical behavior of some rock samples, Civil Engineering Beyond Limits, Vol. 3, DOI: https://doi.org/10.36937/cebel.2021.003.005.
  • Hamzaban, M. T., Rish Sefid Mohammadi, N., Jakobsen, P.D. (2020). The effect of the particle size distribution curve on the abrasivity of non-cohesive soils in LCPC test, Tunneling and Underground Space Technology, Vol. 105, DOI: https://doi.org/10.1016/j.tust.2020.103573.
  • Hamzaban, M. T., Hosseini Tavana, N., Jakobsen, P.D., Bagheriyan, A. R. (2019). The Effect of the Plastic Behavior of Clay Particles on LCPC Abrasivity Coefficient. Tunneling and Underground Space Technology, Vol. 92, DOI: https://doi.org/10.1016/j.tust.2019.103054.
  • Hamzaban, M. T., Jakobsen, P. D., Shakeri, H., Najafi R. (2019). Water Content, Effective Stress and Rotation Speed Impact on the Abrasivity of Granular Soils in Mechanized Excavation Applications. Tunneling and Underground Space Technology, Vol 87, pp 41–55, DOI: https://doi.org/10.1016/J.TUST.2019.02.003.
  • Hosseini Tavana, N., Hamzaban, M. T. (2018). The Effect of Clay on Soil Abrasivity in the results of LCPC Test. Amirkabir Journal of Civil Engineering, Published online, DOI: 10.22060/ceej.2018.14808.5746 (In Persian).

  • Hamzaban, M. T., Sotoudeh, F., Memarian, H. (2018). Measurement of rock abrasivity by a new Cerchar testing device. Iranian Journal of Rock Mechanics, Vol.1 (4), Link (In Persian).
  • Hamzaban, M. T., Karami, B., & Rostami, J. (2018). Effect of Pin Speed on Cerchar Abrasion Test Results. ASTM Journal of Testing and Evaluation, Vol. 47, No. 1. DOI: 10.1520/JTE20170406.

  • Hamzaban, M. T., Memarian, H., Rostami, J. (2018). Determination of the scratching energy index for Cerchar abrasion testing. Journal of Mining & Environment, Vol. 9, No. 1, pp 73-89, DOI: 10.22044/jme.2017.5738.1389.
  • Karami, B., Hamzaban, M. T., Hamidzadeh, R. (2017). The effect of testing speed on Cerchar abrasion index in soft to hard minerals. Iranian Journal of Mining Engineering, Vol. 12, No. 34, pp 69-82, Link (In Persian).

  • Hamzaban, M. T., Memearian, H., Rostami J., Ghasemi, H. R. (2014). Study of Rock-Pin interaction in Cerchar abrasivity Test. International Journal of Rock Mechanics & Mining Science, Vol. 72C, pp 100–108, DOI: 10.1016/j.ijrmms.2014.09.007.

  • Hamzaban, M. T., Memearian, H., Rostami J. (2014). Continuous monitoring of pin tip wear and penetration into rock surface using a new Cerchar abrasivity testing device, Rock Mechanics & Rock Engineering, Vol. 47, No. 2, pp 689–701 DOI: 10.1007/s00603-013-0397-4.

  • Hamzaban, M. T., Memarian, H., Rostami, J. (2013). An investigation to efficiency of various rock abrasivity testing methods. Iranian Journal of Mining Engineering, Vol. 8, No. 19, pp 93-107, Link (In Persian).
  • Hamzaban, M. T., Moosavi, M. (2006). Application of three-dimensional numerical models in analysis of supported tunnel face by grouted bolts. Amirkabir International Journal of Science and Technology, Vol. 17, No. 64, pp 79-91, Link (In Persian).

  • Moosavi, M., Hamzaban, M. T. (2006). Application of three dimensional profiles of deformation and pressure around tunnel in stability analysis of underground excavations. Journal of Faculty of Engineering (Special Issue: Chemical and Mining Engineering), Vol. 40, No. 2, pp 251-262, Link (In Persian).

 

Conference Papers

  • Rahmani, Sh., Hamzaban, M. T. (2020). Numerical modeling of the effect of large excavations on the deformation of shallow tunnels. International Conference on Civil Engineering, Architecture, and the Development of Urban Infrastructures (ICDU), Tehran, Iran (In Persian), CIVILICA.
  • Rish Sefid Mohammadi, N., Hamzaban, M. T. (2020). The effect of different conditions on LCPC abrasive coefficient. 7th Iranian Rock Mechanics Conference (IRMC7), Tehran, Iran (In Persian), ResearchGate.
  • Hamzaban, M. T., Jakobsen, P. D., Touranchehzadeh, A. (2020). Estimating rock mechanical properties with non-destructive tests. ISRM International Symposium Eurock 2020, Trondheim, Norway, OpenPetro.
  • Amanzade, S., Shakeri, H., Hamzaban, M. T. (2017). Investigation of correlations between hydraulic fracturing test results and geomechanical properties of rock specimens. 6th Iranian Rock Mechanics Conference (IRMC6), Tehran, Iran (In Persian), ResearchGate.
  • Amanzade, S., Hamzaban, M. T., Shakeri, H. (2016). Experimental modelling of hydraulic fracturing and comparing the theoretical and experimental breakdown pressure values, 4th International Mining Congress and 6th Iranian Mining Engineering Conference, Tehran, Iran (In Persian), ResearchGate.

  • Karami, B., Hamzaban, M. T., Hamidzadeh, R., Memarian, H. (2015). Effect of relative speed on the wear capacity of minerals in Cerchar abrasion test. 11th Iranian and 2nd Regional Tunneling Conference, Tehran, Iran (In Persian), CIVILICA.

  • Narimani, S., Hamzaban, M. T. (2014) Investigation of hydraulic behavior in Sattarkhan earth-fill dam by the results of instrumentation and numerical modeling. 8th National Congress on Civil Engineering, Babol, Iran (In Persian) CIVILICA.

  • Keyvani, H., Hamzaban, M. T., Shakeri, H. (2014). Experimental modelling of cracks orientation induced by hydraulic fracturing. 5th Iranian Rock Mechanics Conference (IRMC5), Tehran, Iran (In Persian), CIVILICA.

  • Sotoudeh, F., Memarian, H., Hamzaban, M. T., Rostami J. (2014) Improvement of Testing Accuracy by a New Generation of Cerchar Abrasivity Testing Device. Proceedings of North American Tunneling Conference, Los Angeles, USA, ResearchGate.

  • Hamzaban, M. T., Memarian, H. (2008). Determination of relationship between drilling parameters by clustering techniques. In ISRM International Symposium-5th Asian Rock Mechanics Symposium. International Society for Rock Mechanics and Rock Engineering, Tehran, Iran, OpenPetro.

  • Moosavi, M., Hamzaban, M. T. (2006). Numerical back analysis of clay zone in Pardis tunnel, 7th Iranian Tunnel Conference, Tehran, Iran (In Persian), CIVILICA.

     


RESEARCH PROJECTS

  1. Assessment of Soil Abrasive Capacity in Mechanized Excavation Applications by LCPC Test, Grant No. 30/6361, Sahand University of Technology. 
 

PATENTS

  1. Automatic Determination Device of the Rock Abrasion Index, Iranian State Organization of Lands and Deeds Registration, No. & Date of Declaration Resistry: 13915014000307309- 08/12/2012, No. & Date of Patent: 79302-27/04/2013.
 

SUPERVISED MSc THESES

  1. Samad Narimani (2014): Hydro-mechanical back analysis and stability analysis of Sttarkhan earth fill dam by the results of instrument data and numerical modelling (Only Supervisor).

  2. Hadi Keyvani (2014): Laboratory modelling of hydraulic fracturing process and experimental study the effect of stress state on hydraulic induced fractures orientation in natural rock samples (Only Supervisor).

  3. Behzad Absavaran (2015): 3D numerical modelling and stability analysis of tunnel intersections in Tabriz metro project (Principal Supervisor).

  4. Leyli Sabzizadeh (2015): 3D numerical modelling and stability analysis of surface excavations in Tabriz metro project (case study of A2-1 station) (Co-Supervisor).

  5. Soheyla Amanzadeh (2015): Experimental study of the effects of geomechanical parameters on the hydraulic fracturing test results in artificial rock samples (Only Supervisor).

  6. Behnam Karami (2016): Investigation of the effect of pin velocity on Cerchar Abrasivity Index (Only Supervisor).

  7. Reza Najafi (2016): Evaluation of soils wear capacity in mechanized excavations by LCPC tests (Only Supervisor).

  8. Naimeh Hosseini (2016): Effect of clay plastic properties on abrasivity of soils (Only Supervisor).

  9. Negin Rishsefid (2016): Effect of Clay and Water Content on Abrasivity of Granular Soils (Only Supervisor).

  10. Mohammad-Hassan Rajati (2016): Prediction of TBM disk cutters wear in hard rocks by Cerchar test (Co-Supervisor).

  11. Ali Touranchezadeh (2018): The effect of thermal cycles on the mechanical properties of rocks (Only Supervisor).

  12. Ali Reza Bagherian Chakherlou (2018): The effect of kaolinite and bentonite on the wear of soil cutting tools (Only Supervisor).

  13. Shima Rahmani (2019):  The effect of large surface excavations on the deformation of shallow tunnels (Only Supervisor).

  14. Milad Manafi (2020): The Effect of Freeze-Thaw Cycles on the Mechanical Properties of Saturated Rocks (Only Supervisor).

  15. Saeed Ebrahimi (2021): Application of Numerical Modeling in the Stability Analysis of Retaining Structures Under Earthquake Loading (Only Supervisor).

  16. Samane Kanoondoost (2021): Three–dimensional slope stability analysis of open-pit mines with numerical methods (Only Supervisor).

 


OTHER PROFESSIONAL ACTIVITIES

Memberships

  • International Society for Rock Mechanics (ISRM) 2014 – date.
  • Iranian Society for Rock Mechanics (IRSRM) 2014 – date.
  • Iranian Tunneling Association (IRTA) 2014 – date.
  • Iranian Society of Engineering Education (ISEE) 2014 – date.

Journal Reviews

  • Journal of Modern Mechanical Engineering and Technology - Editorial Board Member;
  • Civil Engineering Beyond Limits (ACA Publishing);
  • Global Journal of Earth Science and Engineering – Editorial Board Member;
  • International Journal of Rock Mechanics and Mining Science (Elsevier);
  • Rock Mechanics and Rock Engineering (Springer);
  • Tunneling and Underground Space Technology (Elsevier);
  • Bulletin of Engineering Geology and the Environment (Springer);
  • Journal of Testing and Evaluation (ASTM);
  • Scientific Quarterly Journal of Geosciences (Ministry of Industry and Mines Geological Survey of Iran – In Persian);
  • Iranian Journal of Mining Engineering (Iranian Society of Mining Engineering – In Persian);
  • Iranian Journal of Rock Mechanics (Iranian Society for Rock Mechanics – In Persian).

 


AWARDS
  • Outstanding Graduate in Rock Mechanics, University of Tehran, Iran (2005)
  • First grade in MSc entrance exam in the whole country (2002)
  • Outstanding Graduate in Mining Eng. The Sahand University of Technology, Iran (2001)


SOFTWARE SKILLS
       
 
صفحه اصلی | وب سایت دانشگاه صنعتی سهند | تماس با ما
دانشگاه صنعتی سهند ، دانشکده مهندسی معدن - صندوق پستی: 1996-51335 | دفتر دانشکده: 33459288 041  | mine2@sut.ac.ir